PlumberEtobicokePRO

Plumber Etobicoke PRO logo
BBB

647-699-1073

How much does a plumber cost

How much does a plumber cost
Table of Contents

Leaking Pipes Cost

How much does a plumber cost? Whether fixing a pipe in your bathroom, kitchen or laundry room, plumbing prices can get pricey. Depending on the extent of the damage to plumbing systems, it could cost anywhere from $150-$350 per hour for repairs to be completed by our licensed plumbers.

A plumber will generally charge around $70 (hourly rate), and there may also be expenses involved with finding where your leak is coming from if they need to test any valves that shut off water supplies while they’re working on locating leaks.

Shower Repair Cost

A plumbing repair company may charge $100-$500 to replace a shower head or remove mineral deposits from your home’s plumbing fixtures.

The average plumbing repair cost of corroded valve in the wall can cost around $70, while replacing damaged piping for water supply could be about $280 service fee depending on where the damage is located and how much work it will take plumbers to get the job done.

Flat Rate Prices vs. Hourly Plumbing Rates

How much does a plumber cost for pipes leaking in the walls or under a concrete slab will cost more to repair than plumbing fixtures that need a little TLC.

When plumbers work on plumbing systems, they charge by the hour, not specifically for each job. That means there could be additional costs involved with flat-rate pricing depending on how quickly things get done compared to paying them hourly instead, which can add up when it comes time to pay your plumbing bill at the end of their plumbing inspection.

There are some situations where flat rate plumbing pricing might apply, such as fixing leaks in toilets, faucets or garbage disposals, but this is something worth confirming before signing off, so you don’t have any surprises as additional plumbing costs down the road when your bill arrives.

Emergency, Weekend, or Holiday Plumber Cost

Nighttime plumbing emergency happen when you least expect it to, and these types of plumbing issue can cause a lot of damage. If your plumbing system is damaged or water damage destroyed the walls during an emergency, it could cost plumbers anywhere from $150-$350 per hour to get there once they receive word that there’s an emergency in progress.

24-Hour Emergency plumbing service rates are typically higher over holidays, so making sure you have all the necessary tools at hand before calling someone out will help save time and money since holiday plumbing calls are more expensive.

Plumbing contractor may also charge a premium for emergency service, weekend or holiday plumbing rates since everyone knows it’s more difficult to contact someone during those times.

Average hourly Emergency, Weekend, or Holiday Plumber cost

On average hourly cost of plumbing repair service is about $70-$130 hourly rate. The cost of travel time is usually included, so there are no additional trip fees for coming to your home or business location. If travel expenses are involved, the cost of a plumber may be slightly higher. Plumbers usually tell their customers upfront the quote for plumbing parts and labor costs so that there are no surprises when it comes time to pay the bill. They also offer plumbing estimates for plumbing repair project if requested beforehand by phone or email, and helps prevent any misunderstandings about cost later on.

Cost to replace kitchen sink and faucet

Kitchen plumbing fixtures are usually pretty easy to replace since they’re not too complicated. The average cost for a plumber to install an undermount kitchen sink ranges anywhere from $200-$300, with additional costs involved if you have plumbing damage or need new plumbing lines installed in order to complete the job.

Cost of replacing bathroom sink

A plumbing company may charge anywhere from $200-$500 to replace a bathroom sink depending on the extent of damage and if any plumbing lines need replacing.

Adding new plumbing fixtures such as a shower or bathtub can cost up to around $1000, depending on where your home is located, what type of plumbing fixtures you’re installing, and how many plumbing connections are required for installation.

Generally speaking, the cost of bathrooms plumbing fixtures will range from about $100-$700 per fixture, but this can vary considerably based on plumbing material selection (i.e., porcelain vs ceramic) along with the size of the plumbing pipes that run from the plumbing fixtures to the main shut-off valves.

Cost to replace bathroom faucet

Replacing a bathroom faucet can cost anywhere from $50-$200 depending on the plumbing fixtures you already have installed and whether your plumber has to cut into walls to replace them.

A new sink costs between $100 and $500, but this will vary based on material selection (i.e., porcelain vs ceramic) and the size of the plumbing pipes that run from each plumbing fixture to their respective shut-off valves.

Suppose plumbing fixtures such as toilets, sinks or bathtubs require replacing. In that case, it could be anywhere from about $800-$1100 per fixture, which includes materials, labour fees and any additional charges for cutting into walls if necessary.

Sewer line installation cost

The average cost to have a plumbing company install an underground sewer line ranges anywhere from $1500-$2000 depending on the extent of damage, number of plumbing fixtures involved and whether any walls need to be cut open for plumbers to complete their job.

Suppose you’re looking at installing plumbing lines that are above ground. In that case, this will usually cost about half as much since it doesn’t involve digging or cutting into walls. This is why your local plumbing company may charge between $500-$700 if they already have all the necessary tools such as bobcats, backhoes & excavators available on-site during installation time.

Main sewer line clog cost

The average plumbing company charge to clear a main sewer line blockage is about $84-$132, with the most common method of clearing out main lines being hydro jetting.

Hydro jetting involves using high water pressure water jets to clean away any debris or built-up sediment that may be clogging up your plumbing system. It is usually one of the less costly methods for unclogging stubborn sewer line blockages within older plumbing systems (i.e., cast iron pipes). It can take anywhere from 20 minutes to several hours, depending on how much damage there is and what type of plumbing fixture got plugged up, along with where exactly it’s located. Still, generally speaking, you should expect this job to cost between $500-$1000 to complete.

Cost to install bathroom toilet

Installing a plumbing fixture such as a bathroom toilet typically costs about $400-$700, including material and labour fees, along with any additional charges for cutting into walls if necessary.

It can take anywhere from 20 minutes to several hours depending on how much damage there is and what type of plumbing fixture got plugged up but generally speaking, you should expect this job to cost between $500-$1000 to complete.

If the water supply tube that connects your plumbing system at the street needs replacing, then one professional plumber may charge around $300. At the same time, two or more professionals might charge somewhere around $450, which includes materials, labour costs and pipe replacement costs by using PVC piping instead. You would have to pay extra if they have to cut into walls to access plumbing lines and any additional costs that may be involved if they have to set new plumbing fixtures such as a toilet or vanity sink.

Cost of the sewer line replacement

If your plumbing system is on its last legs and you’re looking at having it replaced, then the average cost for this type of job would run anywhere from about $2000-$5000, depending on how extensive the damage is. The price depends on where exactly are the main shut-off valves located, whether any drainage pipes need replacing (i.e., clay piping), and what method plumbers use when cutting through concrete & brick foundations to replace damaged plumbing systems underneath homes or buildings. 

How much does it cost to fix a leaking pipe?

Depending on the extent of plumbing damage, whether you need to cut into walls for plumbers to complete their job and what type of plumbing fixtures got damaged, such as a leaky pipe, burst pipes under your sink or toilet, etc. determine how much it cost. Generally speaking, replacing plumbing lines above ground usually costs about half as much since it doesn’t involve digging or cutting through any foundations, which is why your local plumbing company may charge between $500-$700. They already have all the necessary tools such as bobcats, backhoes & excavators available on-site during installation.

Cost to repair leaking pipe in wall

Repairing plumbing leaks can range anywhere from $100-$300 depending on how small or big the leak is, whether it’s located in a wall where plumbers would have to cut into walls & drywall to access plumbing lines or underneath floors which requires them to jackhammer out concrete slabs.

Typically plumbing fixture repair costs are around half the price of replacing that particular plumbing fixture and take about 20 minutes for one professional plumber to complete. Still, for plumbing repair cost you should budget between $200 -$1000 if they need more than one individual working at your home during installation time.

Cost to install shower plumbing

If you want to add a plumbing fixture such as a shower or bathroom sink into your home, then expect it to cost anywhere from $300-$500 for master plumber to complete the job.

What are the factors that affect plumbing costs?

If you have plumbing lines that need replacing, then the cost to replace those types of plumbing fixtures can range from $300-$700, depending on how extensive the damage is.

Plumbing fixture installation costs are generally about half as much since it doesn’t require any cutting or digging underneath walls which is why one professional plumber may charge between $400 -$500 for a standard bathroom sink and price range will be around $600-900 for a new bathtub with labour fees included while more than one individual working at your home during installation time will increase these prices by +20%.

Finally, plumbing replacement costs also depend highly on what material was used when initially installing plumbing systems. Such as clay piping instead of PVC stacks, so if you want brand new plumbing installed in your home, then expect plumbing installation costs to run anywhere between $3000-$5000, and plumbing fixture replacement prices will range from half as much, which is around $500 -$800. Additional info you can read here